Welcome to PCBEKY Supply Chain +852-55175442

ADRF5301 Silicon, SPDT Switch, 37 GHz to 49 GHz

Product DetailsThe ADRF5301 is a reflective, SPDT switch manufactured in the silicon process.The ADRF5301 was developed for 5G applications from 37 GHz to 49 GHz. This device has a low insertion loss of 1.4 dB, high isolation of 30 dB, and RF input power

ADRF5023 Silicon SPDT Switch, Nonreflective , 9 kHz to 45 GHz

Product DetailsThe ADRF5023 is a nonreflective, single-pole double-throw (SPDT) switch manufactured in the silicon process.The ADRF5023 operates from 9 kHz to 45 GHz with a typical insertion loss of 1.7 dB and isolation of 42 dB. The device has a RF input

ADG5204 High Voltage, Latch-up Proof, 4-Channel Multiplexer

Product DetailsThe ADG5204 is a complementary metal oxide semiconductor (CMOS) analog multiplexer, comprising four single channels.The ultralow capacitance and charge injection of these switches make them ideal solutions for data acquisition and sample-an

ADG5206 High Voltage, Latch-Up Proof, 16-Channel Multiplexer

Product DetailsThe ADG5206 is a monolithic CMOS analog multiplexer comprising sixteen single channels. The ADG5206 switches one of sixteen inputs to a common output, as determined by the 4-bit binary address lines, A0, A1, A2, and A3.An EN input enables o

ADG508A CMOS 8-Channel Analog Multiplexer

Product DetailsThe ADG508A andADG509Aare CMOS monolithic analog multiplexers with eight channels and dual four channels, respectively. The ADG508Aswitches one of eight inputs to a common output, depending on the state of three binary addresses and an enab

LTC221 Micropower, Low Charge Injection, Quad CMOS Analog Switches with Data Latches

Product DetailsThe LTC221 and LTC222 are micropower, quad CMOS analog switches which typically dissipate only 250µW from ±15V supplies and 40µW from a single 5V supply. Onboard latches allow the LTC221 and LTC222 to interface directly t

ADG444 LC2MOS Quad SPST Switch

Product DetailsThe ADG444 is a monolithic CMOS device comprising four independently selectable switches. It is designed on an enhanced LC2MOS process which provides low power dissipation yet gives high switching speed and low on resistance.The ADG444 swit

ADG442 LC2MOS Quad SPST Switch

Product DetailsThe ADG442 is a monolithic CMOS device comprising four independently selectable switches. It is designed on an enhanced LC2MOS process which provides low power dissipation yet gives high switching speed and low on resistance.The ADG442 swit

MAX349 Serially Controlled, Low-Voltage, 8-Channel Dual 4-Channel Multiplexers

Product DetailsThe MAX349/MAX350 are 8-channel and dual 4-channel serially controlled multiplexers (muxes). These muxes conduct equally well in either direction. On-resistance (100Ω max) is matched between switches to 16Ω max and is flat (10&O

ADG436 LC2MOS ±15 V Dual SPDT Switch

Product DetailsThe ADG436 is a monolithic CMOS device comprising two independently selectable SPDT switches. It is designed on an LC2MOS process which provides low power dissipation yet gives high switching speed and low on resistance.Each switch conducts

MAX4554 Force-Sense Switches

Product DetailsThe MAX4554/MAX4555/MAX4556 are CMOS analog ICs configured as force-sense switches for Kelvin sensing in automated test equipment (ATE). Each part contains high-current, low-resistance switches for forcing current, and higher resistance swi

LTC1380 Single-Ended 8-Channel/Differential 4-Channel Analog Multiplexer with SMBus Interface

Product DetailsThe LTC1380/LTC1393 are CMOS analog multiplexers with SMBus®compatible digital interfaces. The LTC1380is a single-ended 8-channel multiplexer, while the LTC1393 is a differential 4-channel multiplexer. The SMBus digital interface requir

AD8151 3.2 Gbps, 33 x 17 Digital Crosspoint Switch

Product DetailsAD8151 is a member of theXstreamline of products, offering a breakthrough in digital switching and a large switch array (33 x 17) on very little power -- typically 1.5 W. It also operates at data rates in excess of 3.2 Gbps per port, making

AD8152 34 × 34, 3.2 Gbps Asynchronous Digital Crosspoint Switch

Product DetailsThe AD8152 is a breakthrough cross point switch offering a large switch array (34 × 34) on very little power, typically 2.0 W. Additionally, the device operates at data rates up to 3.2 Gbps per port, making it suitable for Sonet/SDH O

MAX4533 Quad, Rail-to-Rail, Fault-Protected, SPDT Analog Switch

Product DetailsThe MAX4533 quad, single-pole/double-throw (SPDT), fault-protected analog switch is pin-compatible with the industry-standard MAX333 and MAX333A. The MAX4533 features fault-protected inputs and rail-to-rail signal handling. The normally ope

ADG752 CMOS, Low Voltage, RF/ Video, SPDT Switch (Single Pole, Double Throw)

Product DetailsThe ADG752 is a low voltage SPDT (single pole, double throw) switch. It is constructed using switches in a T-switch configuration, which results in excellent Off Isolation while maintaining good frequency response in the ON condition.High o

MAX317 Precision, SPST, CMOS Analog Switches

Product DetailsThe MAX317/MAX318/MAX319 are precision, CMOS, monolithic analog switches. The single-pole single-throw (SPST) MAX317is normally closed (NC), the SPST MAX318is normally open (NO), and the single-pole double-throw (SPDT) MAX319 has one normal

DG508A Monolithic CMOS Analog Multiplexers

Product DetailsMaxim's DG508A and DG509A are monolithic CMOS analog multiplexers (muxes): the DG508A is a single 8-channel (1-of-8) mux, and the DG509A is a differential 4-channel (2-of-8) mux.Both devices guarantee break-before-make switching. Maxim

AD8108 325 MHz, 8 x 8 Buffered Video Crosspoint Switch (Gain = 1)

Product DetailsThe AD8108/AD8109are high speed 8 × 8 video crosspoint switch matrices. They offer a −3 dB signal bandwidth greater than 250 MHz and channel switch times of less than 25 ns with 1% settling. With −83 dB of crosstalk and &m

AD8114 Low Cost, 225 MHz, 16 × 16 Crosspoint Switch, G=+1

Product DetailsThe AD8114/AD8115are high speed, 16 × 16 video crosspoint switch matrices. They offer a −3 dB signal bandwidth greater than 200 MHz and channel switch times of less than 50 ns with 1% settling. With −70 dB of crosstalk and

Page 1 / 36