TSV522IYST High merit factor (1.15 MHz for 45 uA) CMOS op-amps

The TSV522IYST series of operational amplifiers offer low voltage operation and rail-to-rail input and output. The TSV522IYST device is the single version, the TSV522IYST device the dual version, and the TSV522IYST device the quad version, with pinouts co

TSZ182HYDT Automotive-grade, very high accuracy (25 uV), high bandwidth (3 MHz), high temperature (150 °C), zero-drift operational amplifiers

The TSZ182HYDT are a single and dual operational amplifier, featuring very low offset voltages with virtually zero-drift versus temperature changes. The TSZ182HYDT offer rail-to-rail input and output, excellent speed/power consumption ratio, and 3 MHz gai

TSZ182IQ2T Very high accuracy (25 uV) zero drift 5V CMOS Op-Amps

The TSZ182IQ2T are single and dual operational amplifiers featuring very low offset voltages with virtually zero drift versus temperature changes.The TSZ182IQ2T offer rail-to-rail input and output, excellent speed/power consumption ratio, and 3MHz gain ba

AD9525 Low Jitter Clock Generator Eight LVPECL Outputs

Product DetailsThe AD9525 is designed to support converter clock requirements for long-term evolution (LTE) and multicarrier GSM base station designs.The AD9525 provides a low power, multioutput, clock distribution function with low jitter performance, al

AD9508 1.65 GHz Clock Fanout Buffer with Output Dividers and Delay Adjust

Product DetailsThe AD9508 provides clock fanout capability in a design that emphasizes low jitter to maximize system performance. This device benefits applications like clocking data converters with demanding phase noise and low jitter requirements.There

HMC338LC3B Sub Harmonic Mixer SMT, 24 - 34 GHz

Product DetailsThe HMC338LC3B is a 24 - 34 GHz Sub-harmonically Pumped (x2) MMIC Mixer with an integrated LO amplifier in a leadless RoHS compliant SMT package. The 2LO to RF isolation is excellent at 30 dB, eliminating the need for additional filtering.

HMC337 GaAs MMIC Sub Harmonic Mixer Chip, 17 - 25 GHz

Product DetailsThe HMC337 chip is a sub-harmonically pumped (x2) MMIC mixer with an integrated LO amplifier which can be used as an upconverter or downconverter. The chip utilizes a GaAs PHEMT technology that results in a small overall chip area of 1.28mm

HMC587 Wideband VCO SMT w/Buffer Amplifier, 5 - 10 GHz

Product DetailsThe HMC587LC4B is a wideband GaAs InGaP Voltage Controlled Oscillator which incorporates the resonator, negative resistance device, and varactor diode. Output power and phase noise performance are excellent over temperature due to the oscil

HMC586 Wideband VCO SMT w/Buffer Amplifier, 4 - 8 GHz

Product DetailsThe HMC586LC4B is a wideband GaAs InGaP Voltage Controlled Oscillator which incorporates the resonator, negative resistance device, and varactor diode. Output power and phase noise performance are excellent over temperature due to the oscil

ADPD2140 Infrared Light Angle Sensor

Product DetailsThe ADPD2140 is an optical sensor that measures the angle of incident infrared light. Light angles calculated from the ADPD2140 response are linear to ±5° within an angular field of view of ±35°.The ADPD2140 has a radi

ADPD188BI Integrated Optical Module for Smoke Detection

Product DetailsThe ADPD188BI is a complete photometric system for smoke detection using optical dual wavelength technology. The module integrates a highly efficient photometric front end, two light emitting diodes (LEDs), and two photodiodes (PDs). These

TDA7439DS13TR 3 band tone controlAudio processor

The TDA7439DS13TR is a volume, tone (bass, mid-range and treble) and balance (left/right) processor for quality audio applications in car-radio and Hi-Fi systems. Selectable input gain is provided. All the functions are controlled by serial bus.The AC sig

TSC214ICT Low / High side bidirectional, zero-drift, current sense amplifiers

The TSC210, TSC211, TSC212, TSC213, TSC214 and TSC215 are a series of zero-drift current sense amplifiers that can sense current via a shunt resistor over a wide range of common mode voltages from -0.3 to +26 V, whatever the supply voltage is. They are av

AD8368 800 MHz, Linear-in-dB VGA with AGC Detector

Product DetailsThe AD8368 is a variable gain amplifier (VGA) with analog linear-in-dB gain control that can be used from low frequencies to 800 MHz. Its excellent gain range, conformance, and flatness are attributed to the Analog Devices, Inc. X-AMP®a

ADL5530 DC to 1000 MHz IF Gain Block

Product DetailsThe ADL5530 is a broadband, fixed-gain, linear amplifier that operates at frequencies up to 1000 MHz. The device can be used in a wide variety of wired and wireless devices, including cellular, broadband, CATV, and LMDS/MMDS applications.Th

HMC633LC4 SMT Driver Amplifier, 5.5 - 17 GHz

Product DetailsThe HMC633LC4 is a GaAs PHEMT MMIC Driver Amplifier in a leadless 4x4 mm ceramic surface mount package which operates between 5.5 and 17 GHz. The amplifier provides up to 30 dB of gain, +30 dBm Output IP3, and +23 dBm of output power at 1 d

HMC618A GaAs SMT pHEMT Low Noise Amplifier, 1.2 - 2.2 GHz

Product DetailsThe HMC618ALP3E is a GaAs pHEMT MMIC Low Noise Amplifier that is ideal for Cellular/3G and LTE/WiMAX/4G basestation front-end receivers operating between 1.2 - 2.2 GHz. The amplifier has been optimized to provide 0.75 dB noise figure, 19 dB

HMC-ALH508-DIE Low Noise Amplifier Chip, 71 - 86 GHz

Product DetailsThe HMC-ALH508 is a three stage GaAs HEMT MMIC Low Noise Amplifier (LNA) which operates between 71 and 86 GHz. The HMC-ALH508 features 13 dB of small signal gain, 4.5 dB of noise figure and an output power of +7 dBm at 1 dB compression from

LTC6412 800MHz, 31dB Range Analog-Controlled VGA

Product DetailsThe LTC6412 is a fully differential variable gain amplifier with linear-in-dB analog gain control. It is designed for AC-coupled operation in IF receiver chains from 1MHz to 500MHz. The part has a constant OIP3 across a wide output amplitud

ADA4930-1 Ultralow Noise Drivers for Low Voltage ADCs

Product DetailsThe ADA4930-1/ADA4930-2are very low noise, low distortion, high speed differential amplifiers. They are an ideal choice for driving 1.8 V high performance ADCs with resolutions up to 14 bits from dc to 70 MHz. The adjustable output common m

Page 1 / 22